Lamborghini Huracan/Audi R8

T1 Complete Fuel Solution - Huracan/R8
The T1 Complete Fuel Solution for the second-generation Audi R8 and Lamborghini Huracan comes with all the necessary parts required for install, but there a...
Fri, 24 May, 2024 at 4:40 PM
T1 Motec M1 AWD Wire Harness (with and without I/O option)
There are two versions to this harness.  Both contain all necessary wires to allow full AWD control by the Slave Motec ecu.  The harness with the I/O option...
Tue, 9 Jan, 2024 at 2:43 PM
Belak 18" Huracan/R8 Drag Pack Instructions
***Installation of this drag pack and the modifications necessary to run the setup is recommended to be done by a qualified technician.*** Depending on ...
Tue, 24 Jan, 2023 at 3:37 PM
Belak Wheel Maintenance
The Belak wheels equipped with titanium hardware need to be checked periodically for bolt torque as the lower torque spec compared to steel hardware on both...
Wed, 5 Apr, 2023 at 10:05 AM
Belak 18/17" Huracan/R8 Drag Pack Instructions
***Installation of this drag pack and the modifications necessary to run the setup is recommended to be done by a qualified technician.*** Depending on ...
Thu, 8 Jun, 2023 at 11:26 AM
T1 Motec M1 Autoshift Harness
Wiring in your T1 Motec M1 Autoshift Harness is covered in the MoTeC documentation for the ECU kit. This install guide is attached below and the instruction...
Wed, 1 Nov, 2023 at 2:52 PM
T1 BPC R8/Huracan Power Harness
*Installation of this kit should only be performed by a qualified technician and before any work is performed the battery power should be disconnected compl...
Thu, 2 Nov, 2023 at 8:36 AM
T1 M1 R8/Huracan:T1 M1 GPS Harness
The T1 M1 GPS Harness comes terminated and ready to pair with your MoTeC ECU, with corresponding pin locations labeled on the four harness wires. If yours n...
Wed, 1 May, 2024 at 9:02 AM
T1 M1 R8/Huracan:T1 M1 Keypad Harness
The T1 M1 Keypad Harness comes terminated and ready to pair with your MoTeC ECU. The pin out for the Master ECU Adapter Box is as follows: Red - Breakou...
Wed, 1 May, 2024 at 9:00 AM
T1 V10 CRANKCASE AND EVAP KIT
The T1 V10 Crankcase and Evap Kit is a fairly universal kit that can be adapted to work with a variety of aftermarket turbo kits and intake manifolds, on ei...
Wed, 5 Jun, 2024 at 11:00 AM