T1 Product Instructions

T1 Hall Effect Cam Sensor Wiring
Wiring for the T1 Dual Pole Hall Effect Cam Sensor is as follows.  The 4 pin DTM connector has the pin locations numbered on the back side of the connect...
Wed, 2 Sep, 2015 at 2:18 PM
T1 Cam Trigger Setup Instructions for MoTeC M1 Using GPA or GPR Packages
Below are the M1 configuration files you can import using M1 Tune 1.4.  If you need instruction on how to do this with other packages or earlier versions...
Mon, 7 Nov, 2016 at 11:19 AM
T1 Cam Trigger Setup instructions for MoTeC M84, M400, M600, M800, and M880
The below images show what needs to be set in the MoTeC M84, M400, M600, M800, or M880 for the T1 Cam Trigger on a B series engine.
Mon, 7 Nov, 2016 at 11:15 AM
T1 Cam Trigger Setup Instructions for AEM and Universal
Wed, 8 Oct, 2014 at 2:40 PM
T1 Battery Cutoff Kit Instructions
Wed, 8 Oct, 2014 at 1:38 AM
T1 G Force Honda Shifter Kit
Fri, 6 Jun, 2014 at 2:54 PM
T1 Fast Response Glass Bead Air Temperature Sensor (1/16 NPT fitment)
This sensor is a 1/16 NPT fitment, this requires thread sealant to seal.  The glass bead tip can be exposed to fuel with no problems, this opens up many...
Wed, 8 Nov, 2023 at 8:31 AM